Plastic recycling machine is a plastic recycling equipment, and its host is the extruder, which consists of extrusion system, transmission, and heating and cooling system. Plastic granulator unit auxiliary Actinobacillus device, straightening device, preheat devices, cooling devices, traction devices, meter, Spark Tester, Take-up device. The extruder uses its optional use of auxiliary equipment are not the same. Such as there is cut off, plastic shredder, drying, printing device.
The main features of the plastic granulator take full advantage of the high-pressure friction uninterrupted heating system, automatic heat production, to avoid heating, save some energy saving. Plastic granulator plastics granulator polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), PET,, ABS, and so on.
Plastic granulator – Note:
Granulation confidential forward operation; avoid reverse.
The granulator avoid cold fasting operation, must be the heat engine feeding operation, to avoid the sticky bar (axle) phenomenon.
3, the feed inlet of the granulator, put allowed to enter the pores within the iron and other debris. To avoid the accident, affecting production.
Plastic granulator operation requiring the attention of
Operator filler must be optimistic about the compound do not enter the debris master temperature.
(5) If a boot, not a material phenomenon of sticky die, the die temperature is too high, a little cooling can not stop, under normal circumstances.
Water temperature should be 50 — 60 ° C below the easy-off, beyond the easy adhesion, the beginning of boot is best to add half the hot water, if there is no condition, available when the dice to the transport for some time within the granulator. rising water temperatures and then allowed to automatically pelletizing, in order to avoid breaking, the water temperature exceeds 60 ° C, the need to inward loop by adding cold water to maintain the temperature.
7 dice to pull all get into against the roller, otherwise it will damage the granulator. Outward contention drama to take the material to prove that the impurities have been blocked filter vent, you should speed shutdown to replace the mesh, the mesh can choose 40 — 60 mesh.