China Plastics Processing Industry Association chairman Liao Zhengpin points out, although China is important plastic consume one of countries, but now nearly half of dependence on imports of plastic raw materials. Mr Liu said: ” China ‘s dependence on imported plastic still amounts to 44%, gap is very big. Recycled plastic is the solution of plastic resources the main auxiliary route. At the same time, plastics recycling industry will help to solve rural labor obtain employment, develop rural economics, increase the income of the farmers and the local tax. Recycled plastics can also promote Plastic Recycling Equipment industry development, such as Plastic Shredder, Plastic Recycling Machine ”

Mr. Liao proposed solution, waste plastics recycling is the key problem to the whole product life cycle, development and design of cheap, good environment compatibility, has a certain strength and functional plastics. He to auto plastics as an example, for the Chinese auto manufacturers widely used plastic, estimates a year can save fuel more than 5000000 tons, is 3500000000 yuan. On the other hand, Mr. Liao pointed out that, due to the domestic electronic waste disposal legislation is not perfect, and people ‘s environmental awareness is still relatively weak, resulting in a large number of electronic waste is not reasonable disposal, environmental pollution and serious waste of resources and other problems remain to be solved.

Computer, TV, freezer products annually produces 500000 tons of above old plastic, if these materials can be fully made use of, then the country a year can save lots of petroleum resources and save a lot of energy. Comparison of developed country and China ‘s per capita consumption of plastics, just visible Chinese plastic industry has great potential for development. China’s per capita consumption of more than46kg,40kgcompared to the world average level for high.

The United States per capita consumption of about 170 kilograms of plastic, Belgium higher amounts to 200 kilograms, other developed country also is in 120 kilograms of above. In 2008, the world of plastic consumption amounts to 2.45 tons, China’s annual consumption of plastic aggregates more than 60000000 tons, accounting for about 24.5% of global consumption. Build China’s green machine is the trend of the times of the fabric is very move, break through the green trade barrier and the way to improve the competitiveness. However, he also mentioned that because of China’s plastics machinery industry in the face of more varieties, lower grades, yield the largest status, to promote the green transformation and industrial upgrading has greater difficulty.

Swiss recycled plastic bottles and the number of absolute reached a record high. But nationwide recycling way is single.

White opaque bottle having another recovery way, milk chamber of Commerce to recover them. Food, cosmetics and other daily necessities packaging mostly was sent to the garbage incineration equipment.

Switzerland ‘s guiding principle is: if there is a clear environmental and economic benefits, we use Plastic Recycling Equipment (Plastic Shredder, Plastic Recycling Machine ). The recycled material is of good quality, and can use them for making new products, such as food packaging. And throw into the garbage incinerator in comparison, if there is another kind of plastics recycling way better, of course. Since 2000, flammable, chemically unstable garbage in law are not allowed to burn.

All of the garbage can be burned. From the acquisition of energy is mainly by plastic. As long as it is collected and recycled plastic products is not easy, you can only use them as a manufacturing energy.

Some Swiss community has begun trying to plastic recycling. TheChu Gechengcollection of plastic products for many years, residents can use the 1.90 Swiss francs for a 40 litre capacity can hold shampoo bottles and other plastic products bags.

This more than ordinary garbage tax is cheap, and Switzerland many other city and village, in Zug also pay garbage bag tax.

But ” for recycling. ” this event has never been formally implemented, because Zug residents can free throw all kinds of plastic waste, without pay. A worker in a plastic into the garbage heap will check the quality of plastics, all plastic will eventually be sent to the PlastOil company, which is a local company, responsible for the plastic into oil.

This has been a pioneer project, the future will see it correctly. But if we do nothing, also what outcomes are not. Bern since 2005 began collecting plastic, engaged in this work on the city a total of 8 waste collection shop, a total of 250 tons of collection to

A new international study sought to explore, for enterprises and consumers, recycled plastic and no other method and possibility. Redilo company is in charge of this project, the company specialised in sustainable development resource strategy. Redilo RaymondSchelker asked the business partner:

Apart from household garbage, industrial products such as plastic barrels and plastic film and the farmers grass roll of plastic packaging, can also be recycled.

If we can put the surplus process, process, control, standard, management standardization, as will expand the application example, it not only oneself is a renewable plastic production enterprises, can also be other similar enterprise technology, equipment provider.

If we put conveniently lost beverage bottle can use Plastic Recycling Equipment to be recycled and reused, it’s actually mined in a new field.

Plastic bottles recycled many times

1 tons of polyester consume 6 tons of oil were transformed, global polyester consumption growth year after year, while waste PET bottles production also increased year by year. Polyester regeneration is equal to saving oil. As a burgeoning industry on international at present, has built a number of modern renewable bottle grade polyester production line, many Multi-National Corporation have started in their products to use a certain proportion of regenerated polyester material. Waste polyester packaging recycling disposal and recycling industry, prospect of.

Waste polyester packaging recycling is not a new thing, but over the years many food grade Pet Recycling Machine with pet recovery, is then simply use Plastic Shredder for crushing, before being transported to the small workshop relegated drawing done short fiber or plastic woven bags, the low added value utilization way a great waste of resources potential value, and can not be recycled. While the surplus is hard, that will waste polyester bottles can be transformed into the new technology of bottle grade polyester chip.

Ordinary PET bottle production process is a native of polyester raw materials — bottle factory casting factory blow blowing — – — into the consumer market. A surplus of joining the ” recycling sorting package” ” deep cleaning ” and ” purification ” several advanced technology, waste plastic bottle recycling up. Through the two key steps, and can produce high-end renewable bottle grade polyester chips, can be used to create new polyester bottle, maximizing the original value of resource mining, so as to realize multiple circulation.

1 manufacture of fuel

In recent years, a new and practical technology of waste plastics recycling technology of fuel and Plastic Recycling Equipment in Chengdu success. The waste plastic recycling plant with waste plastics, such as food bags, waste bags, beverage bottles, plastic shoe leather, wire and cable, foam boxes, plastic toys and so on production of high quality fuel, by Sichuan Province and Technical Supervision Inspection qualified lead high quality fuel oil, the company ‘s strength is the use of this oil plants, while the 1 tons of waste plastics by use of  Plastic Recycling Machinery can produce about half a ton of oil.

Expert introduction, the waste plastic pyrolysis processing into fuel, technically there is no problem, but in the actual production, including Europe and the United States Japan and has not been reported and documented in China, research in this area in the lab to be able to do, but in practice due to the cost of production is too high, it is difficult to generate economic benefits, so it cannot be large scale production and in Chengdu was born of the technology, for China’s management of ” white pollution ” provides an effective practical new technology.

2 production of waterproof antifreeze compound

With foamed plastic waste as the base material, the special formula and process conditions of the production of multiple varieties and multiple uses in the construction of indoor and outdoor decoration waterproof glue paste glue series products, is a less investment quick competitive energy eliminating plastic pollution ideal project can produce tons per ton of waste rubber product, per ton of rubber packing5kgx 200 barrels, comprehensive production cost about 3000 yuan, price in 6000 yuan.

3 preparation of aromatic compounds

Japan is to the waste plastic as raw materials to produce chemical raw materials of new technology research and development of the utility of the method is PE PP waste plastics are heated to300 ℃, turning it into a carbohydrate, and then adding catalyst, synthesis of benzene toluene and xylene to aromatic compounds at a temperature of525 ℃reaction time, waste plastics 70% can be converted to useful aromatic substances, these substances can be used chemicals and pharmaceutical raw materials and gasoline fuel improver, uses a very wide and other components can be converted to hydrogen and propane.

Preparation of 4 multi functional resin adhesive

The product has good adhesion, high gloss, impact resistance, acid and alkali resistance and other characteristics, Nissan 1 tons, costs 2300 yuan per ton, the market price of 5000 yuan used for the industrial production of various glass steel products, can greatly reduce the production cost, in addition, but also the production of waterproof coating anti rust paint furniture lacquer putty and other plastic products, can replace all kinds of glass glue, wood glue, glue for printing use.

5 Aluminum auto-separating agent

Aluminum plastic composite packaging is widely used in food and pharmaceutical packaging with the social progress, the waste is increasing year by year, as a result of aluminum-plastic composite together, not only no one shows any interest in granulation, recycling, incineration, both environmental pollution and waste of resources automatic separation of agent used aluminum, aluminum-plastic packaging waste into containers, add water and automatic separation of agent, aluminum-plastic packaging can in 20 minutes to complete separation of per ton aluminum, aluminum-plastic packaging waste can be isolated from 0.85 tons of recycled plastics and 0.1 tons of scrap recycling processing waste daily 1 tons of aluminum-plastic composite materials, the profit in the 1000-2000 million.

6 Fire decorative plate

Widely used in interior decoration ceiling furniture manufacturing the products not only look beautiful and colorful, but also has the fire, waterproof, anti-corrosion, insulation, the same type, not aging, can be arbitrary crimp characteristics.

7 renewable particles

The use of Plastic Shredder can waste polyethylene polypropylene plastics by broken – Cleaning – heated plastic – extrusion molding process, produce market selling renewable particles Nissan 1 tons of profitability 300-500 yuan.

Production of the 8 grams of king of leakage

It is the traditional waterproof material of the upgrading of products, used in the surface of the housing, like brushing a layer of glass sodium, closed fast permeability strong, having a dry quickly plasticized fast leveling performance is good, strong adhesion acid and alkali resistance and other characteristics, service life of up to 20 years and convenient construction, year round construction, not to be heated, a coating is a low cost, high profits, costs per ton 2000-3000 yuan, the market price of 5000 yuan.