European plastics recycling industry a new standard will come into effect in August, standard of the company will have access to EuCertPlast certification.

EuCertPlast certification is to industry internal scrap traceability, environmental friendliness, recovery transparency outstanding case standardization, in order to improve plastics recycling rate and enterprise operation transparency. The standard will strictly abide by the European Committee for standardization of plastic recycling 15343 standard as well as national current standards.

The EuCertPlast certificate will include plastic recycling enterprises of raw material type, treatment capacity of equipment, processed products, recovery ratio, business transparency grade, over a period of time waste plastic processing quantity. If you want to receive this certification, plastic recycling enterprises must meet a series of requirements. Among them, have correct plastics recycling permit, during plant operation how to deal with waste, how to discharge waste water, how to control energy consumption is to examine factors.

EuCertPlast project started in 2009, by the European plastics Recycling Association ( EuPR ) and the European plastic regeneration and Recycling Association (EPRO ) take the lead, the European Plastic Processing Association ( EuPC ) and some plastics processing and recycling companies are involved in the project. At present, Italy plastic tissue COREPLA has expressed an intention is based on the EuCertPlast standard to superintend its plastic recycling companies. By 2013, EuCertPlast will be incorporated into the blue angel plan.

EuPC executive director Alexander Dangis said: ” now in the field of plastic recycling the good performance of the company can gain this certification, which will promote the increasing of plastics processors use recycled plastic. ” EuPR chairman Tho E Mans pointed out that ” Europe needs a harmonious audit system “, EuCertPlast for the European plastics recycling business to create a fair competition environment.

European plastics recycling industry by 1500 companies, each year more than 4500000 tons of recyclable plastic waste. It is understood, for these materials are Plastic Recycling Machinery  ( such as the Pet Recycling Machine、Plastic Shredder, plastic recycling equipment ) recycling or again into the market, are often difficult to know. Therefore, a unified European plastics recycling regulation system is very necessary.

Reuse of waste plastics Plastic Recycling Machinery  recycling is the key to the recovery and regeneration, regeneration is melting. Melt regeneration technology is divided into simple and complex regeneration regeneration. Simple regeneration for plastic production process of leftover bits and pieces, the waste plastics variety onefold, less pollution, generally through simple treatment can be directly processed into granular material or sheet material. Compound regeneration is aimed at current consumption, recycling of waste plastics, after sorting, pretreatment, selecting grain, forming regeneration.

One, pretreatment

Preprocessing consists of sorting, crushing, washing and drying.

① withPlastic Shredder to crush

For larger parts of the plastic waste in the granulation should be crushed to fine crushing. Can be selected according to requirements of different models and the function of the crushing equipment.

The cleaning and drying

The pollution is not serious and the structure is complex and large waste plastic, to be taken before cleaning, after crushing technology. First with detergent water immersion, to remove some of the adhesive and the oil stains, then rinse with water, after cleaning out to dry.

The pollution of waste plastics, should be first rough washing, removing foreign matter such as sand, stone and metal, to prevent damage to the crusher. Waste plastics by rough after washing, centrifugal dewatering, then enters the crusher. After the break and then further refined washing, to remove the bag in which the debris. After cleaning, drying, so that the next melt granulation.

Cleaning technology in our country at present still adopt manual cleaning and mechanical cleaning two methods. Manual cleaning of low work efficiency, we should vigorously develop mechanical cleaning. Its working principle is to be cleaned waste plastics in damp washing fluid, if it is contaminated with oil products, with appropriate concentration of lye can be effective. Soak for several hours, and then mechanical agitation, through mutual friction and impact can remove the impurity and dirt.

In two, prior to molding processing renewable materials

Recycling of waste plastics plastic recycle machine through a series of processing to obtain dry powder, or direct the plasticized molding, or by granulation and forming. Prior to this, often need to join all kinds of ingredients, complexing agent, stabilizer, lubricant, such as coloring agents, plasticizers, fillers and various types of the agents.

Waste plastics generally have different degrees of aging, in order to ensure that the recycled plastic products stable performance, should join the stabilizer. Such as thermal stabilizer, UV stabilizer. In the use of stabilizers should pay attention to its toxicity and pollution of. Such as Recycled PVC ( PVC ) of basic lead class has a certain toxicity, not making and food contact plastic products; elastic stabilizer in 4010 deep color, not making light products. PVC renewable materials can be selected with the basic lead type, fatty soap, composite stabilizer; polyethylene ( PE ), polypropylene ( PP ) renewable materials available 1010 stabilizer.

Waste plastics often has a certain degree of pollution, so it is often used in dark colorant, such as carbon black, iron oxide red, plastic palm.

The lubricant is also recycled material essential auxiliaries. Regeneration of polyvinyl chloride ( PVC ) material in the presence of polar lubricant than polar lubricant effect is good, as in the use of chlorinated paraffin wax than the common good, whereas for polypropylene ( PP ), polystyrene ( PS ), polyethylene ( PE ) renewable materials with ordinary paraffin.

Recovery of polyvinyl chloride ( PVC ) material often require plasticizer. Since the original plastic products of small molecular plasticizer easy WIP in migration phenomenon, so the regeneration of polyvinyl chloride ( PVC ) products need to add some amount of plasticizer, optic products required hardness and. In addition, if the amount of soft polyvinyl chloride ( PVC ) recovery items and rigid polyvinyl chloride ( PVC ) recycling materials mixing, can reduce or eliminate the use of plasticizers.

With the rapid development of the plastics industry, the recycling of waste plastic as an energy saving, environmental protection measures, widespread attention. Especially in developed countries, started early work in this area has received a significant benefit.

The United States is the world of plastic-producing countries. The United States as early as the 1960s had already begun extensive research recycling of waste plastics. If it does not accelerate the pace of recovery of waste plastics, the United States will not be able to withstand the the growing waste plastics arising from environmental pollution and the loss to the economy. Proportion of the United States the use of Plastic Recycling Machine recycling waste plastic varieties: 50% of packaging products, building materials 18%, consumer goods 11%, 5% of the auto parts, electrical and electronic products, other plastic varieties proportion of polyolefin accounted 61% PVC 13%, accounted for 10% of polystyrene, polyester 11%, other 5%. The late 1980s, the United States nearly 10% recovery of waste plastics. According to statistics, the United States in the late 20th century waste plastic recycling rate of 35% or more. , Combustion of waste plastics recycling energy increased by 3% in the 1980s to 18%; burial of waste products from 96% down to 37%. American use of heat in the combustion of waste plastics, thermal decomposition to extract chemical raw materials, such as a lot of work and achieved some results. In addition, any State of the United States to resolve the problem of plastic waste has increased investment in the Plastic Recycling Equipment, the legislation also use tough measures.

Japan is the second largest country in the production of plastic. In the 1980s, the average annual waste plastics emissions accounted for 46% of the production. Visible, and the recycling of waste plastics has become a serious social problem in Japan. And Japan is an energy shortage in the country, and the recycling of waste plastics has been maintaining a positive attitude. The early 1990s, Japan recycling waste plastic rate of 7%, combustion heat rate of 35%. Japan is a world leader in the development and application of mixed waste plastics. Such Mitsubishi Petrochemical Co. the developed REVERZER equipment can be made of a variety of recycled products containing non-plastic content of up to 2% (such as paper) mixing the thermoplastic plastic scrap, Japan about more than 20 units of such a device, with 30 The number of companies using this Plastic Recycling Machinery  processing recycled products.

Italy is the the European recycling of waste plastics work best country. The Italian waste plastic accounts for about 4% of the municipal solid waste, the recovery rate of up to 28%. Italy has also developed a mechanical separation of waste plastics from municipal solid waste. Such a recovery is expected to join the new material, to ensure that it has sufficient mechanical properties, can produce garbage bags, profile shapes, hollow products.

Face of bottled Waste, the solution of the Dutch government solve the whereabouts of the waste. In August 2007, the Dutch government, should be gradually national channel, so that people automatically collect waste plastic into plastic waste collection points, the plastic waste plastic recycle machine recycling opportunities. This means that 16 million people will not only have glass, paper materials, highly contaminated products such as batteries and perishables waste sorting garbage collection bins should also be noted, in the future on the details of life, discarded plastic garbage separately.

Environmental activities in the past, the recovery of a large quantity of waste plastic is only limited to the industrial zone of residual waste plastics. 2007 Dutch town management began experimental plastic recycling to their residents. Each household residents were awarded plastic plastic bags recycling specify a day a month street. The other day, residents can also personally scrap handed municipal waste recycle bin to. Experimental waste plastic recycling action to get a warm response from the Dutch nationals. The survey shows that 91% of the residents of the Netherlands are willing to participate in a plastics dumped action. So, the Government of the Netherlands to expand their operations in the major cities and hundreds of small villages round plastic recycle bin. Dutch domestic waste plastic recycling plastics consumption is only 20% from the private sector, an estimated 42% in 2012.

The general European winemakers and soft drinks manufacturer provide recycling services bottles. Dutch consumers buy products, the required the prepaid of charge bottles fee and charge me fees after retreat bottles get a deposit back. Kinds of plastic bottles without deposit fee became waste plastics. The responsibility of the residents deal with waste plastic bottles first bottle rinse and drain, then riding flat to reduce occupied space. Modern family kitchen and bathroom waste plastic containers. Once can enjoy recycling Plastic Recycling Equipment, the countries will be able to obtain the huge recycled plastic resources. , Plastics recycling technology to make a huge contribution to the protection of the environment directly. The plastic waste transported after pressed brick, the hot melt renewable liposomes. Polyester cotton, wig, zipper jagged, green bags, gum bullets, a bicycle can be made into mats, the polyethylene packaging fruit tray etc.. Japan even recycled fiber clothing.

Burned clean is not clean burning plastic produce harmful effects of dioxin toxic air, the environment and ecology brewing. At the same time, it also burned a big stack of banknotes. WastePlastic Recycling Machinery  in Europe started fast implementation and concentrated, these waste plastics and even if there is a surplus available for export to Hong Kong, and transferred to the mainland as a renewable resource.

INTERPLASTICA is composed of plastic in the exhibition industry have long enjoyed a good reputation in the Dusseldorf exhibition company to sponsor, to 2013 January has been successfully held 15 sessions. Due to the Russian federal government industry and energy department, government of the Russian Federation Ministry of education and science, Moscow city hall, the Russian Chemical Society ‘s full support, and the Dusseldorf exhibition company mature mode of operation and far-reaching market impact, INTERPLASTICA has become the most influential in the CIS countries, the plastic industry exhibition.

In plastic industry is closely related to the construction, automotive, consumer electronics and packaging and other fields, the Russian market grows rapidly, so the plastic raw materials, processing equipment needs continue to maintain strong growth. In recent years, Russia and neighboring countries, continuously build new plastic processing plants, production capacity continues to expand. These plastic equipment and plastic raw materials suppliers undoubtedly is good news. In Russia, China plastic machinery, the United States, Germany were ranked the top three. According to VDMA, Germany in 2007 exported to the Russian equipment amounted to 210000000 euros, an increase of 31%. The local processors in order to maintain the market competition, more and more inclined to select high-end equipment. Russia needs to import plastic machinery focused on low cost small plastic machinery. This gives China the equipment exports to provide a good opportunity. On the types, main imports of injection molding machines, blow molding machines, vacuum molding machine, plastic extrusion machine and Plastic Recycling Machines. From the entrance way, usually divided into three categories, including the purchase of the entire factory equipment, updating equipment upgrades, as well as the production line equipment. Our country has Russia is one of the important sources of plastics machinery imports, domestic plastic machinery enterprises can use the geographical advantages to expand China plastic into the mouth, half of export, processing machinery in the Russian market share.

At the same time in Moscow EXPOCENTER exhibition UPAK ITALIA is by the Dusseldorf exhibition company to sponsor, theme for packaging, packaging machinery, logistics professional exhibition, is the focus of Russian equipment manufacturing industry and the traders of the important platform, is Russia and the CIS region display first-class mechanical equipment only platform.

Review of last:

In 2012 INTERPLASTICA, nearly 12000 square meters of net exhibition area of more than 500 exhibitors displaying in the market the most competitive products and services, has attracted a total of 20500 viewers in russia. 2011 exhibition scale and influence continue to expand, 23000 professional visitors, net exhibition area of 12545 square meters and 30 countries from around the world with 561 exhibitors. Among Russia, China, Germany and Italy exhibitors accounted for the vast majority of. Visible, the exhibition not only have strong influence in the region, there is a strong international exhibition development potential.

Scope of exhibits:

Of plastic injection molding machine Plastic Shredder  ， Plastic Recycling Equipment, double screw extruding machine plastic packaging

Waste Plastic Recycling Equipment applications become more complex: the impurities in the material supply is increasing, more and more foreign matter content. One of the reasons is the new classification method; another reason is that, before being able to not use Plastic Recycling Machine

recycling waste material or only time-consuming expensive manual processing can be recycled scrap, now more and more frequently used automatic processing method. Germany H erbold M eckeshei m Secretary for the production of Plastic Shredder is an improvement of the impact hammer, can solve these problems. With Bob as cutting tool: due to having evaded foreign objects, and thus not subject to outside influence. With uniaxial or biaxial crushing machine, a high speed disintegrator has another advantage to replace the much faster.

High speed plastic grinder can be used as a dry or wet pulverizer. The machine in the wet operation produces a high friction is desirable side effect, it will greatly promote the well washing, and removing paint, paint or label. If crushed hollow objects or bottle, particularly in the polyolefin, another advantage of showing its effect: this material is not only a foreign object (such as a gate plate steel handle ) serious pollution, and was the extreme wear. This mill without formal welded onto the drum or housing. Because be replaceable armor plate, regardless of where to wear, the affected surface can be quickly replaced. H Erbo LD high speed grinding machine cutting tool of the price is extremely low, moreover, this kind of machine operating costs very economy.

As the global petrochemical industry ‘s rapid development, the domestic petrochemical industry for granulating machine, Plastic Shredder of the rapid growth of demand. The domestic high-end machine in large domestic manufacturing plastic machine market is still very rare, imported products are still takes absolutely advantage. Plastic granulating machine as an example, which combines mechanical, electrical, instrumentation, high integration, high automation control level of large ethylene project, is one of the key equipment in the. In the recently held in Japanese Kobe Steel plastic granulator LCM China User Conference, Japanese experts said, the large-scale petrochemical device drives the plastic granulator is large change, and the user on the mechanical stability and energy saving request more and more high.

According to introducing, our country has passed and foreign cooperative manufacturing a plurality of 70000 tons / year of plastic granulator, but without success. Now a large plastic granulator unit production capacity reached 50 tons / hour or more, the equivalent of 300000～ 400000 tons / year capacity, design and production difficulty is great. The only Japanese Kobe Steel Ltd., Japan Steel Company, the United States Farrel Corp has a large plastic granulator unit design, manufacture and installation of debugging techniques.

The expert points out, large-scale, precise and advanced control technology, will be the domestic large-scale plastic granulating machine research and development direction.

In recent years, China’s Plastic Recycling Machinery  manufacturing industry is rapid, sustained growth trend. This is reflected in the import and export, not only that the Chinese plastic machinery has very big growth on crop, also shows that the domestic plastic machinery on quality and technology has been improved obviously.

A country, become useless to be treasure

Plastics is widely used in people’s lives and the national economy in various fields. Plastic has a great convenience to people’s work and life. However with the plastic production continues to increase, its waste has been increasing year by year, the waste plastics can not be degraded in nature, on the air, soil and water pollution, formation of the “white pollution ” is eroding our lives and homes.

In recent years, the processing of waste plastics, recycling, has been a focus in the world, China’s Ministry of science and technology, economic and trade department and other departments have been included in the focus of plastic waste comprehensive utilization project. In this context, do regeneration of waste plastics plant is a good choice, do plastic particles renewable plant investment is mainly Plastic Recycling Equipment ( such as plastic granulator, Plastic Recycling Machine s ).

In two, a huge market market not anxious

Wide source of raw materials. According to statistics, a county daily from the waste plastic woven bags, convenient bags, agricultural film, plastic barrels, boxes, shoes, packaging, toys, bottles of mineral water, industrial waste products such as plastic dozens of tons, and the price is low. The waste plastic products sufficient to meet a number of waste plastics recycling processing plant sources of raw materials.

Market demand. Recycled plastics can be used for film blowing, injection molding, pipe, wire drawing, extrusion profiles, processed into new plastic products. Market sales of disposable convenient bag, plastic basin, barrel, the shoes are made of renewable particles. Recycled plastics market is extremely wide, plastic enterprises demand. As a medium-sized plastic factory, year need one thousand tons of recycled plastics, a medium-sized factories to be recycled plastic two thousand tons, huge market demand, the use of recycled plastics for with a powerful market support.

Product not anxious market. At present our country waste plastics recycling utilization rate is not high, recycling of waste plastics factory is not much, especially uneven distribution, mostly local almost blank; on the other hand, our country in the last few years the rapid development of industry, the market flourishs, large plastic market has dozens of waste plastic particles in a straight, demand exceeds supply, the price rises again rose.