Italy is the the European recycling of waste plastics work best country. The Italian waste plastic accounts for about 4% of the municipal solid waste, the recovery rate of up to 28%. Italy has also developed a mechanical separation of waste plastics from municipal solid waste. Such a recovery is expected to join the new material, to ensure that it has sufficient mechanical properties, can produce garbage bags, profile shapes, hollow products.

Face of bottled Waste, the solution of the Dutch government solve the whereabouts of the waste. In August 2007, the Dutch government, should be gradually national channel, so that people automatically collect waste plastic into plastic waste collection points, the plastic waste plastic recycle machine recycling opportunities. This means that 16 million people will not only have glass, paper materials, highly contaminated products such as batteries and perishables waste sorting garbage collection bins should also be noted, in the future on the details of life, discarded plastic garbage separately.

Environmental activities in the past, the recovery of a large quantity of waste plastic is only limited to the industrial zone of residual waste plastics. 2007 Dutch town management began experimental plastic recycling to their residents. Each household residents were awarded plastic plastic bags recycling specify a day a month street. The other day, residents can also personally scrap handed municipal waste recycle bin to. Experimental waste plastic recycling action to get a warm response from the Dutch nationals. The survey shows that 91% of the residents of the Netherlands are willing to participate in a plastics dumped action. So, the Government of the Netherlands to expand their operations in the major cities and hundreds of small villages round plastic recycle bin. Dutch domestic waste plastic recycling plastics consumption is only 20% from the private sector, an estimated 42% in 2012.

The general European winemakers and soft drinks manufacturer provide recycling services bottles. Dutch consumers buy products, the required the prepaid of charge bottles fee and charge me fees after retreat bottles get a deposit back. Kinds of plastic bottles without deposit fee became waste plastics. The responsibility of the residents deal with waste plastic bottles first bottle rinse and drain, then riding flat to reduce occupied space. Modern family kitchen and bathroom waste plastic containers. Once can enjoy recycling Plastic Recycling Equipment, the countries will be able to obtain the huge recycled plastic resources. , Plastics recycling technology to make a huge contribution to the protection of the environment directly. The plastic waste transported after pressed brick, the hot melt renewable liposomes. Polyester cotton, wig, zipper jagged, green bags, gum bullets, a bicycle can be made into mats, the polyethylene packaging fruit tray etc.. Japan even recycled fiber clothing.

Burned clean is not clean burning plastic produce harmful effects of dioxin toxic air, the environment and ecology brewing. At the same time, it also burned a big stack of banknotes. WastePlastic Recycling Machinery  in Europe started fast implementation and concentrated, these waste plastics and even if there is a surplus available for export to Hong Kong, and transferred to the mainland as a renewable resource.

With the rapid development of the plastics industry, the recycling of waste plastic as an energy saving, environmental protection measures, widespread attention. Especially in developed countries, started early work in this area has received a significant benefit.

The United States is the world of plastic-producing countries. The United States as early as the 1960s had already begun extensive research recycling of waste plastics. If it does not accelerate the pace of recovery of waste plastics, the United States will not be able to withstand the the growing waste plastics arising from environmental pollution and the loss to the economy. Proportion of the United States the use of Plastic Recycling Machine recycling waste plastic varieties: 50% of packaging products, building materials 18%, consumer goods 11%, 5% of the auto parts, electrical and electronic products, other plastic varieties proportion of polyolefin accounted 61% PVC 13%, accounted for 10% of polystyrene, polyester 11%, other 5%. The late 1980s, the United States nearly 10% recovery of waste plastics. According to statistics, the United States in the late 20th century waste plastic recycling rate of 35% or more. , Combustion of waste plastics recycling energy increased by 3% in the 1980s to 18%; burial of waste products from 96% down to 37%. American use of heat in the combustion of waste plastics, thermal decomposition to extract chemical raw materials, such as a lot of work and achieved some results. In addition, any State of the United States to resolve the problem of plastic waste has increased investment in the Plastic Recycling Equipment, the legislation also use tough measures.

Japan is the second largest country in the production of plastic. In the 1980s, the average annual waste plastics emissions accounted for 46% of the production. Visible, and the recycling of waste plastics has become a serious social problem in Japan. And Japan is an energy shortage in the country, and the recycling of waste plastics has been maintaining a positive attitude. The early 1990s, Japan recycling waste plastic rate of 7%, combustion heat rate of 35%. Japan is a world leader in the development and application of mixed waste plastics. Such Mitsubishi Petrochemical Co. the developed REVERZER equipment can be made of a variety of recycled products containing non-plastic content of up to 2% (such as paper) mixing the thermoplastic plastic scrap, Japan about more than 20 units of such a device, with 30 The number of companies using this Plastic Recycling Machinery  processing recycled produ

Plastic shredder, just as its name implies is broken plastic material shredder. In injection molding machine or pelleting machine production of raw materials at the same time, the adverse product and nozzle material, can in time into the machine side plastic crusher, after crushing OK, and keep the crushing of clean, dry, in the “rain material proportion valve” fixed proportion of cases, the raw material not shuikou crushing mixing, molding, make good products, recycling.

The use of plastic shredder

Applicable garlic street box class, thin pieces, blow molding parts, bottle, shell and plastic recycling. Plastic disintegrator convenient operation, in blade is simple and direct, flat knife wide structure suitable for crushing large volume thin wall, thin material products, improve the efficiency of crushing, Equipped with electric safety design, hopper using double structure, inner fill sound insulation materials, motor with overload protection device, power equipment has good safety and environmental, economical in power and durable.

The main characteristics of plastic shredder

Plastic shredder using alloy steel blade, long life. At the same time, the machinery separated design, easy maintenance and cleaning garlic street, and a double structure, equipped with sound insulation, noise is low, knife shaft seat through strict balance test, the machine base and equipped with four-wheel, shift under convenient.

Plastic shredder in energy conservation and emission reduction in play an important role, we will find that plastic crusher in saving energy drop in row contribution, therefore, developing new, energy-saving plastic crusher is today’s burning issue, at present China’s crusher market is the development trend of crusher production has been saturated, and the development of new type of crusher market is a blank, and now some of the crusher manufacturers are low market competition, so new, high-end of the shredder market is very few people competition, this will give a few large crusher provided by the manufacturer to do a competition platform.

Similar to the plastic crusher some plastic recycling equipment and plastic granulator, etc., these devices to the invention of plastic industry has brought a lot of the Gospel, also to our environment protection have made a lot of contributions.

Choppy, the leading position. Aspect of the global plastics industry is dizzying.

Take a look at our two immediate neighbors – Japan and India.

In recent years the the Japanese press industry has been in a period of instability. Just a recovery from the global financial crisis began in 2008. Other issues, such as currency exchange rates, was to follow. The earthquake and nuclear crisis broke out on March 11, 2011, the shutdown of many companies in Japan a few months, also in Europe and the United States and domestic market sales slump. The latest show, the The Japanese plastics sector resorted number of strokes, gradually ease the plight.

First, the high-tech as the engine of growth of the industry. In Japan, many small and medium-sized manufacturers are faced with the plight of the domestic market is shrinking. They need to increase the participation in the global market, they will be paying technology and expand the global reach as a key to future growth.

Second，Is looking for opportunities to expand overseas production to offset the domestic downturn. Despite facing many difficulties. However, the injection molding machine industry in Japan is still at the global forefront. Such as: plastic shredder, plastic recycle machine, Pp Pe recycling machine. They are now more willing to spend to expand its own production networks in Asia.

Third, is the place to go to the lowest cost. Increase investment in Southeast Asia and India has become a the distinctive trend nowadays, in this regard in order to reduce China’s excessive reliance on: two aspects of some industry executives believe that the investment prospects of these countries China better

India also do plastic exhibition, and confident.

If the fast-growing emerging markets should be able to inject impetus to the world economy, India’s plastics industry seems to have been ready for picking up this heavy responsibility. Industry leaders predict that the next decade the Indian plastics industry will maintain double-digit growth. Industry who said, driven by this, the Indian plastics exhibition has now become the world’s third largest after the K show in Germany and China Chinaplas plastics exhibition.

Road have made the Japanese homeland small, rich resources owe eyes must outwards; while India’s vast congregation, good internal strength, since fame – are unique.

The large-scale production and extensive application at the same time will produce large amounts of plastic waste in plastic products, easy to damage the environment and harm to human health. Faced with the growing problem of plastic waste pollution, many developed countries have established a relatively complete plastic waste recycling system and to develop appropriate laws and regulations. China in recent years more and more attention to plastic waste recycling and reuse, attach importance to the study of plastic recycling equipment, plastic granulator, plastic recycle machine, pet recycling machine and plastic grinder research and development, in particular, the recent “Circular Economy Promotion Law, the formulation and adjustment of the VAT policy of recycling of waste materials and other related policies and measures, will play a far-reaching significance and impact of recycled plastics industry in China and the development of plastics recycling equipment industry.

How to deal with post-consumer plastic waste is a complex and difficult project, therefore, the industry association published an article entitled How to improve the efficiency of plastic recycling, plastic recycling problem solving approaches described in this article and stating the10 steps, consider these steps to be able to add more post-consumer plastic waste recycling.

1, closely monitoring the country’s plastic collection systems, different recycling systems operating in Europe in order to better synergy

2, stop the unsustainable use of plastic (such as bio-degradable plastics plastics and oxygen). Plastic recycling equipment to be able to separate the functions of these non-recyclable plastic.

3, the establishment of the objectives of the mechanical recycling of plastics, mechanization only to play a greater potential for plastic recycling

4,Limit plastic waste exports, in order to ensure the supply of European recovery

5 taken to encourage fiscal policy to encourage the European plastics recycling industry

6, to provide an effective solution to ensure the plastic recycling equipment in accordance with the law.

7, eliminating plastic recycling equipment unreasonable and discriminatory legislation or standard

8, a substantial increase in the cause of public green procurement and the procurement of recycled plastic

9, the use of economic instruments to promote the external plastic recycling equipment and other similar waste and recycling system into the European plastics recycling organization

10, enhanced communication and cooperation of the entire value chain

Therefore, we should be the vision of development, improve industry-wide awareness of environmental protection, protection of the environment in accordance with the law, to rely on the adjustment of industrial structure and economic growth mode transformation of the production environment to ensure the environmental safety of the plastics industry. Reasonable and safe use of plastic to provide a guarantee from the start, establish and improve the recycling system.

With the increasing consumption of plastic products, waste plastics continues to grow. Of waste plastic as plastic film, plastic wire and woven goods, foam, plastic crates and containers, household plastic products, plastic bags and agricultural film, etc.. In addition, China’s automotive plastics consumption has reached 40 million tons of electronic and home appliances to apply plastic consumption has more than 100 million tons. These products has become waste after one of the important source of plastic scrap. Plastic waste storage, transportation, processing applications and post-processing if appropriate. Is bound to damage the environment and endanger the health of the people.

In the context of these realities, our plastic recycling equipment into being, and plays an important role.

The role and significance of the plastic recycling is very important. Deteriorating in today’s environment of increasing lack of various resources, we can use the plastic recycling machinery , plastic shredder and other equipment to improve the lot of help and improve people’s awareness of environmental protection, protecting the environment.

1, help to raise people’s awareness of environmental protection. Itself is the behavior of the recycled plastic in the world practice the protection of the environment, to promote people to take good care of our beautiful homeland, do not let the disposable lunch boxes, waste plastic cups and other waste plastic polluting the environment. Plastics recycling from the action requires people to improve their ideological awareness, improve awareness of environmental protection, continue to struggle for our homeland.

2, and provide consumers with affordable plastic products. Greatly reduce the cost of production because the plastic recycling, plastic items on the sales price also decreased, therefore recycled plastic is correct.

Plastic recycling have a place. It is not only conducive to the protection of the environment, human health protection, but also conducive to the production of the plastics industry, the country’s sustainable development. Is optimistic about the outlook for plastics recycling. From today’s environment, the social point of view needs starting plastics recycling processing plastic gas-guzzling, hard to decompose, the best way to damage the environment.

Waste plastic is misplace resources; Plastic granulator, is a magic weapon of resource recovery, Renewable plastic granulator, is the process of circular economy. Molding machine for any plastic regeneration field entrepreneurs make a sword, a series of good equipment to arm themselves, is engaged in the high efficiency production. From his many years production practice of the granulation based on experience, developed the market the most practical granulation manufacturers of plastic granulator, the most economical renewable plastic granulator, the most allow the user to save worry of waste plastic granulator.

Benefits the country and the plastic widely used in people’s living and national economic fields. Plastic the appearance of the great convenience to people’s work and life. However, with plastic yield increases unceasingly, the waste has increased year by year, these waste plastic in nature cannot be degradation of air, soil and water produce pollution, formation of “white pollution” is eroding our lives and homes.

In recent years, waste plastics processing, plastic recycling machine, increasingly attention by all countries in the world, China’s ministry of science and technology, its departments have plastic recycling equipment into the key topics. In this context, do waste plastic regeneration factory is a good choice, do plastic regeneration grain factory main investment is machinery and equipment. Cable conductor preheating for insulation extrusion and sheathed extrusion are necessary. For insulating layer, especially thin layer insulation, can not allow the existence of porosity, line core in the crowded bag before through the high temperature preheating can thoroughly clean the surface of the water, oil pollution. For sheathed extrusion speaking, its main role is to drying cable conductor, prevent the moisture role make sheath appeared in the possibility of porosity.

According to statistics, every day a county from the waste plastic woven bag, convenience bag, agricultural film and plastic drum, box, shoes, packaging, toys, mineral water bottles, industrial waste plastics products of dozens of tons, and the price is low. These waste plastics products enough to satisfy several waste plastics recycling plant raw material source. Market demand is big. Renewable plastic recycling equipment can be used for blown film, injection molding, laguan, drawing and extrusion profiles, processing become the new plastic products. The market sales of disposable convenience bag, plastic basin, barrel, shoes, etc is mostly by plastic recycling machine, plastic Shredder, plastic granulator processing is made. Renewable plastic market extremely wide, plastic enterprise demand is big.

Single screw machine and double screw machine: a is a screw, a screw is two root. All is to use a motor driven. Power for screw different and different. 50 cone double power of about 20 kw, 65 is about 37 kw. Production and anticipates the screw related, 50 cone double output is about 100-150 kg/H, 65 cone double is about 200-280 kg/H. Single screw production is only half.

plastic recycle machine according to the screw quantity can be divided into single screw, twin-screw and screw extruder. At present by the single screw extruder used the most extensively, suitable for general material extrusion processing. Pp Pe Recycling Machinehas the fricative heat less, material by shear is evener, screw the transport capacity bigger, extrusion quantity is stable, material in the machine in the cylinder to stay long, mixed evenly.

Single screw extrusion machine whether as plasticizing granulation machinery or molding processing machinery plays an important role, in recent years, single screw extruder had the very big development. At present the German production of large granulation with single screw extrusion machine, screw diameter of 700 mm, production for 36 t/h.

Single screw extruder main mark is the key parts – screw development. Since in recent years, people on the screw had a lot of theoretical and experimental research, has been nearly kinds of screw, common separation type, shear, barrier type, FenLiuXing and wave type, etc.

From single screw development to see, although in recent years the single screw extruder has more perfect, but with high polymer materials and plastic products continuously development, will emerge more characteristics of the new type of screw and special single screw extruder. On the whole, single screw extruder to high speed, high efficiency, specialty direction.

Plastic Recycling Equipment feeding characteristic is good, suitable for powder processing, and than single screw extruder have better mixing, exhaust, reaction and the clean function, the characteristic is processing thermal stability poor plastic and blending material more shows its superiority. In recent years abroad twin screw extruder has very big development, various forms of double screw extruder has series and commercialization, the production of more also manufacturers.